Collectors surface : 2.0 m².

Solar collector: Titanium Full Plate Selective Solar Collector

Solar Collector dimensions: 2m x 1m

Τύπος : ST-DGL INOX Τριπλής ενέργειας

Base dimensions : 1,55m x 0,75m

Installation : Tiled roof

Made in Greece

The INOX SOLAR TECH ST-DGL solar water heater is of excellent quality. The quality of the storage tank is also important for both the longevity of the system and the minimization of heat losses.

Solar Water Heater Certificates: See certificates

BOILER TECHNICAL CHARACTERISTICS

• Thermos container made of special steel with enamelling.
• Heat exchanger made of special steel.
• Thermal container insulation (polyurethane 70mm, 40kg/m3).
• External cover made of stainless steel (INOX) 316L HiMo, particularly resistant to ultraviolet rays, humid climates and coastal areas.
• Absorber tube with expansion cap.
• Electric resistance 4Kw (optional), anti-corrosive, with safety thermostat.
• Magnesium anode for corrosion protection.
• Hot water output.
• Closed circuit output.
• Cold water inlet (water supply network) with 10 atmosphere safety valve.
• Enameled coil for connection to central heating (only for triple energy boilers).
• Closed circuit safety valve.

COLLECTOR TECHNICAL CHARACTERISTICS

• Aluminum collector frame (powder coated).
• Aluzinc collector back 0.4mm thick.
• Selective absorbing surface high selective PVD coating with absorption coefficient α = 0.95 ± 0.02 and emission coefficient ε = 0.05 ± 0.02.
• Welding with laser technology to optimize performance. Copper hydroskeleton Ø 22mm (headers) and Ø 8mm (risers) for optimal flow of the thermal carrier.
• 30mm thick stone wool insulation and 20mm thick side reinforcements.
• Security safety glass, 4mm thick, for complete tightness, EPDM rubber is placed between the glass and the frame.

Το άρθρο Ηλιακός θερμοσίφωνας INOX 120 λίτρα 2,0m2 τριπλής ενέργειας για κεραμοσκεπή εμφανίστηκε πρώτα στο Solar Clima.

Collectors surface : 1,5 m².

Solar collector: Titanium Full Plate Selective Solar Collector

Solar Collector dimensions: 1,5m x 1m

Τύπος : ST-DGL INOX Τριπλής ενέργειας

Base dimensions : 1,55m x 0,75m

Installation : Tiled roof

Made in Greece

The INOX SOLAR TECH ST-DGL solar water heater is of excellent quality. The quality of the storage tank is also important for both the longevity of the system and the minimization of heat losses.

Solar Water Heater Certificates: See certificates

BOILER TECHNICAL CHARACTERISTICS

• Thermos container made of special steel with enamelling.
• Heat exchanger made of special steel.
• Thermal container insulation (polyurethane 70mm, 40kg/m3).
• External cover made of stainless steel (INOX) 316L HiMo, particularly resistant to ultraviolet rays, humid climates and coastal areas.
• Absorber tube with expansion cap.
• Electric resistance 4Kw (optional), anti-corrosive, with safety thermostat.
• Magnesium anode for corrosion protection.
• Hot water output.
• Closed circuit output.
• Cold water inlet (water supply network) with 10 atmosphere safety valve.
• Enameled coil for connection to central heating (only for triple energy boilers).
• Closed circuit safety valve.

COLLECTOR TECHNICAL CHARACTERISTICS

• Aluminum collector frame (powder coated).
• Aluzinc collector back 0.4mm thick.
• Selective absorbing surface high selective PVD coating with absorption coefficient α = 0.95 ± 0.02 and emission coefficient ε = 0.05 ± 0.02.
• Welding with laser technology to optimize performance. Copper hydroskeleton Ø 22mm (headers) and Ø 8mm (risers) for optimal flow of the thermal carrier.
• 30mm thick stone wool insulation and 20mm thick side reinforcements.
• Security safety glass, 4mm thick, for complete tightness, EPDM rubber is placed between the glass and the frame.

Το άρθρο Ηλιακός θερμοσίφωνας INOX 120 λίτρα ST-DGL 1,5m2 τριπλής ενέργειας για κεραμοσκεπή εμφανίστηκε πρώτα στο Solar Clima.

Solar collector surface : 2,0 m²

Solar collector: Titanium Full Plate Selective Solar Collector

Solar Collector dimensions: 2m x 1m

Type : ST-DGL INOX Dual energy

Base dimensions : 1,55m x 0,75m

Installation : Tiled roof

Made in Greece

The INOX SOLAR TECH ST-DGL solar water heater is of excellent quality. The quality of the storage tank is also important for both the longevity of the system and the minimization of heat losses.

Solar Water Heater Certificates: See certificates

BOILER TECHNICAL CHARACTERISTICS

• Thermos container made of special steel with enamelling.
• Heat exchanger made of special steel.
• Thermal container insulation (polyurethane 70mm, 40kg/m3).
• Internal sheet metal 3 mm
• External cover made of stainless steel (INOX) 316L HiMo, particularly resistant to ultraviolet rays, humid climates and coastal areas.
• Absorber tube with expansion cap.
• Electric resistance 4Kw (optional), anti-corrosive, with safety thermostat.
• Magnesium anode for corrosion protection.
• Hot water output.
• Closed circuit output.
• Cold water inlet (water supply network) with 10 atmosphere safety valve.
• Enameled coil for connection to central heating (only for triple energy boilers).
• Closed circuit safety valve.

COLLECTOR TECHNICAL CHARACTERISTICS

• Titanium Full Plate Selective Solar Collector
• Aluminum collector frame (powder coated).
• Aluzinc collector back 0.4mm thick.
• Selective absorbing surface high selective PVD coating with absorption coefficient α = 0.95 ± 0.02 and emission coefficient ε = 0.05 ± 0.02.
• Welding with laser technology to optimize performance. Copper hydroskeleton Ø 22mm (headers) and Ø 8mm (risers) for optimal flow of the thermal carrier.
• 30mm thick stone wool insulation and 20mm thick side reinforcements.
• Security safety glass, 4mm thick, for complete tightness, EPDM rubber is placed between the glass and the frame.

Το άρθρο Ηλιακός θερμοσίφωνας INOX 120 λίτρα ST-DGL 2.0m2 διπλής ενέργειας για κεραμοσκεπή εμφανίστηκε πρώτα στο Solar Clima.

Liter : 120 lt

Solar collector surface : 1,5 m²

Solar collector: Titanium Full Plate Selective Solar Collector

Solar Collector dimensions: 1,5m x 1m

Type : ST-DGL INOX Dual energy

Base dimensions : 1,55m x 0,75m

Installation : Tiled roof

Made in Greece

SOLAR TECH solar water heater is of excellent quality and consists of a hot water storage tank, collector(s), the base and its connection parts with the network. The quality of the storage container is also important both for the longevity of the system and for the minimization of thermal losses.

Solar Water Heater Certificates: See certificates

BOILER TECHNICAL CHARACTERISTICS

• Thermos container made of special steel with enamelling.
• Heat exchanger made of special steel.
• Thermal container insulation (polyurethane 70mm, 40kg/m3).
• Internal sheet metal 3 mm
• External cover made of stainless steel (INOX) 316L HiMo, particularly resistant to ultraviolet rays, humid climates and coastal areas.
• Absorber tube with expansion cap.
• Electric resistance 4Kw (optional), anti-corrosive, with safety thermostat.
• Magnesium anode for corrosion protection.
• Hot water output.
• Closed circuit output.
• Cold water inlet (water supply network) with 10 atmosphere safety valve.
• Enameled coil for connection to central heating (only for triple energy boilers).
• Closed circuit safety valve.

COLLECTOR TECHNICAL CHARACTERISTICS

• Titanium Full Plate Selective Solar Collector
• Aluminum collector frame (powder coated).
• Aluzinc collector back 0.4mm thick.
• Selective absorbing surface high selective PVD coating with absorption coefficient α = 0.95 ± 0.02 and emission coefficient ε = 0.05 ± 0.02.
• Welding with laser technology to optimize performance. Copper hydroskeleton Ø 22mm (headers) and Ø 8mm (risers) for optimal flow of the thermal carrier.
• 30mm thick stone wool insulation and 20mm thick side reinforcements.
• Security safety glass, 4mm thick, for complete tightness, EPDM rubber is placed between the glass and the frame.

Το άρθρο Ηλιακός θερμοσίφωνας INOX 120 λίτρα ST-DGL 1,5m2 διπλής ενέργειας για κεραμοσκεπή εμφανίστηκε πρώτα στο Solar Clima.

Liter : 120 lt

Solar collector surface : 1,5 m²

Solar collector: Titanium Full Plate Selective Solar Collector

Solar Collector dimensions: 1,5m x 1m

Type : ST-DGL INOX IN-OUT Dual energy

Base dimensions : 1,55m x 0,75m

Installation : Tiled roof

Made in Greece

SOLAR TECH solar water heater is of excellent quality and consists of a hot water storage tank, collector(s), the base and its connection parts with the network. The quality of the storage container is also important both for the longevity of the system and for the minimization of thermal losses.

Solar Water Heater Certificates: See certificates

BOILER TECHNICAL CHARACTERISTICS

• Thermos container made of special steel with enamelling.
• Heat exchanger made of special steel.
• Thermal container insulation (polyurethane 70mm, 40kg/m3).
• Internal sheet metal 3 mm
• Εξωτερικό και εσωτερικό ανοξείδωτο ατσάλι (INOX) 316L HiMo, ιδιαίτερα ανθεκτικό στις υπεριώδεις ακτίνες, σε υγρά κλίματα και σε παραθαλάσσιες περιοχές.
• Absorber tube with expansion cap.
• Electric resistance 4Kw (optional), anti-corrosive, with safety thermostat.
• Magnesium anode for corrosion protection.
• Hot water output.
• Closed circuit output.
• Cold water inlet (water supply network) with 10 atmosphere safety valve.
• Enameled coil for connection to central heating (only for triple energy boilers).
• Closed circuit safety valve.

COLLECTOR TECHNICAL CHARACTERISTICS

• Titanium Full Plate Selective Solar Collector
• Aluminum collector frame (powder coated).
• Aluzinc collector back 0.4mm thick.
• Selective absorbing surface high selective PVD coating with absorption coefficient α = 0.95 ± 0.02 and emission coefficient ε = 0.05 ± 0.02.
• Welding with laser technology to optimize performance. Copper hydroskeleton Ø 22mm (headers) and Ø 8mm (risers) for optimal flow of the thermal carrier.
• 30mm thick stone wool insulation and 20mm thick side reinforcements.
• Security safety glass, 4mm thick, for complete tightness, EPDM rubber is placed between the glass and the frame.

Το άρθρο Ηλιακός θερμοσίφωνας INOX ΜΕΣΑ-ΕΞΩ 120 λίτρα ST-DGL 1,5m2 διπλής ενέργειας για κεραμοσκεπή εμφανίστηκε πρώτα στο Solar Clima.

Solar collector surface : 2,0 m²

Solar collector: Titanium Full Plate Selective Solar Collector

Solar Collector dimensions: 2m x 1m

Type : ST-DGL INOX IN-OUT Dual energy

Base dimensions : 1,55m x 0,75m

Installation : Tiled roof

Made in Greece

The INOX SOLAR TECH ST-DGL solar water heater is of excellent quality. The quality of the storage tank is also important for both the longevity of the system and the minimization of heat losses.

Solar Water Heater Certificates: See certificates

BOILER TECHNICAL CHARACTERISTICS

• Thermos container made of special steel with enamelling.
• Heat exchanger made of special steel.
• Thermal container insulation (polyurethane 70mm, 40kg/m3).
• Internal sheet metal 3 mm
• Εξωτερικό και εσωτερικό ανοξείδωτο ατσάλι (INOX) 316L HiMo, ιδιαίτερα ανθεκτικό στις υπεριώδεις ακτίνες, σε υγρά κλίματα και σε παραθαλάσσιες περιοχές.
• Absorber tube with expansion cap.
• Electric resistance 4Kw (optional), anti-corrosive, with safety thermostat.
• Magnesium anode for corrosion protection.
• Hot water output.
• Closed circuit output.
• Cold water inlet (water supply network) with 10 atmosphere safety valve.
• Enameled coil for connection to central heating (only for triple energy boilers).
• Closed circuit safety valve.

COLLECTOR TECHNICAL CHARACTERISTICS

• Titanium Full Plate Selective Solar Collector
• Aluminum collector frame (powder coated).
• Aluzinc collector back 0.4mm thick.
• Selective absorbing surface high selective PVD coating with absorption coefficient α = 0.95 ± 0.02 and emission coefficient ε = 0.05 ± 0.02.
• Welding with laser technology to optimize performance. Copper hydroskeleton Ø 22mm (headers) and Ø 8mm (risers) for optimal flow of the thermal carrier.
• 30mm thick stone wool insulation and 20mm thick side reinforcements.
• Security safety glass, 4mm thick, for complete tightness, EPDM rubber is placed between the glass and the frame.

Το άρθρο Ηλιακός θερμοσίφωνας INOX ΜΕΣΑ-ΕΞΩ 120 λίτρα ST-DGL 2.0m2 διπλής ενέργειας για κεραμοσκεπή εμφανίστηκε πρώτα στο Solar Clima.

Collectors surface : 2.0 m².

Solar collector: Titanium Full Plate Selective Solar Collector

Solar Collector dimensions: 2m x 1m

Type : ST-DGL INOX IN-OUT Triple energy

Base dimensions : 1,55m x 0,75m

Installation : Tiled roof

Made in Greece

The INOX SOLAR TECH ST-DGL solar water heater is of excellent quality. The quality of the storage tank is also important for both the longevity of the system and the minimization of heat losses.

Solar Water Heater Certificates: See certificates

BOILER TECHNICAL CHARACTERISTICS

• Thermos container made of special steel with enamelling.
• Heat exchanger made of special steel.
• Thermal container insulation (polyurethane 70mm, 40kg/m3).
• Εξωτερικό και εσωτερικό από ανοξείδωτο ατσάλι (INOX) 316L HiMo, ιδιαίτερα ανθεκτικό στις υπεριώδεις ακτίνες, σε υγρά κλίματα και σε παραθαλάσσιες περιοχές.
• Absorber tube with expansion cap.
• Electric resistance 4Kw (optional), anti-corrosive, with safety thermostat.
• Magnesium anode for corrosion protection.
• Hot water output.
• Closed circuit output.
• Cold water inlet (water supply network) with 10 atmosphere safety valve.
• Enameled coil for connection to central heating (only for triple energy boilers).
• Closed circuit safety valve.

COLLECTOR TECHNICAL CHARACTERISTICS

• Aluminum collector frame (powder coated).
• Aluzinc collector back 0.4mm thick.
• Selective absorbing surface high selective PVD coating with absorption coefficient α = 0.95 ± 0.02 and emission coefficient ε = 0.05 ± 0.02.
• Welding with laser technology to optimize performance. Copper hydroskeleton Ø 22mm (headers) and Ø 8mm (risers) for optimal flow of the thermal carrier.
• 30mm thick stone wool insulation and 20mm thick side reinforcements.
• Security safety glass, 4mm thick, for complete tightness, EPDM rubber is placed between the glass and the frame.

Το άρθρο Ηλιακός θερμοσίφωνας INOX ΜΕΣΑ-ΕΞΩ 120 λίτρα 2,0m2 τριπλής ενέργειας για κεραμοσκεπή εμφανίστηκε πρώτα στο Solar Clima.

Collectors surface : 1,5 m².

Solar Collector dimensions: 1,5m x 1m

Type : ST-DGL INOX IN-OUT Triple energy

Base dimensions : 1,55m x 0,75m

Installation : Tiled roof

Made in Greece

The INOX SOLAR TECH ST-DGL solar water heater is of excellent quality. The quality of the storage tank is also important for both the longevity of the system and the minimization of heat losses.

Solar Water Heater Certificates: See certificates

BOILER TECHNICAL CHARACTERISTICS

• Thermos container made of special steel with enamelling.
• Heat exchanger made of special steel.
• Thermal container insulation (polyurethane 70mm, 40kg/m3).
• Εξωτερικό και εσωτερικό από ανοξείδωτο ατσάλι (INOX) 316L HiMo, ιδιαίτερα ανθεκτικό στις υπεριώδεις ακτίνες, σε υγρά κλίματα και σε παραθαλάσσιες περιοχές.
• Absorber tube with expansion cap.
• Electric resistance 4Kw (optional), anti-corrosive, with safety thermostat.
• Magnesium anode for corrosion protection.
• Hot water output.
• Closed circuit output.
• Cold water inlet (water supply network) with 10 atmosphere safety valve.
• Enameled coil for connection to central heating (only for triple energy boilers).
• Closed circuit safety valve.

COLLECTOR TECHNICAL CHARACTERISTICS

• Aluminum collector frame (powder coated).
• Aluzinc collector back 0.4mm thick.
• Selective absorbing surface high selective PVD coating with absorption coefficient α = 0.95 ± 0.02 and emission coefficient ε = 0.05 ± 0.02.
• Welding with laser technology to optimize performance. Copper hydroskeleton Ø 22mm (headers) and Ø 8mm (risers) for optimal flow of the thermal carrier.
• 30mm thick stone wool insulation and 20mm thick side reinforcements.
• Security safety glass, 4mm thick, for complete tightness, EPDM rubber is placed between the glass and the frame.

Το άρθρο Ηλιακός θερμοσίφωνας INOX ΜΕΣΑ-ΕΞΩ 120 λίτρα ST-DGL 1,5m2 τριπλής ενέργειας για κεραμοσκεπή εμφανίστηκε πρώτα στο Solar Clima.

Collectors surface : 1,5 m².

Solar Collector dimensions: 1,5m x 1m

Type : ST-DGL INOX IN-OUT Triple energy

Base dimensions : 1,55m x 0,75m

Made in Greece

The INOX SOLAR TECH ST-DGL solar water heater is of excellent quality. The quality of the storage tank is also important for both the longevity of the system and the minimization of heat losses.

Solar Water Heater Certificates: See certificates

BOILER TECHNICAL CHARACTERISTICS

• Thermos container made of special steel with enamelling.
• Heat exchanger made of special steel.
• Thermal container insulation (polyurethane 70mm, 40kg/m3).
• Εξωτερικό και εσωτερικό από ανοξείδωτο ατσάλι (INOX) 316L HiMo, ιδιαίτερα ανθεκτικό στις υπεριώδεις ακτίνες, σε υγρά κλίματα και σε παραθαλάσσιες περιοχές.
• Absorber tube with expansion cap.
• Electric resistance 4Kw (optional), anti-corrosive, with safety thermostat.
• Magnesium anode for corrosion protection.
• Hot water output.
• Closed circuit output.
• Cold water inlet (water supply network) with 10 atmosphere safety valve.
• Enameled coil for connection to central heating (only for triple energy boilers).
• Closed circuit safety valve.

COLLECTOR TECHNICAL CHARACTERISTICS

• Aluminum collector frame (powder coated).
• Aluzinc collector back 0.4mm thick.
• Selective absorbing surface high selective PVD coating with absorption coefficient α = 0.95 ± 0.02 and emission coefficient ε = 0.05 ± 0.02.
• Welding with laser technology to optimize performance. Copper hydroskeleton Ø 22mm (headers) and Ø 8mm (risers) for optimal flow of the thermal carrier.
• 30mm thick stone wool insulation and 20mm thick side reinforcements.
• Security safety glass, 4mm thick, for complete tightness, EPDM rubber is placed between the glass and the frame.

Το άρθρο Ηλιακός θερμοσίφωνας INOX ΜΕΣΑ-ΕΞΩ 120 λίτρα ST-DGL 1,5m2 τριπλής ενέργειας εμφανίστηκε πρώτα στο Solar Clima.

Collectors surface : 2.0 m².

Solar collector: Titanium Full Plate Selective Solar Collector

Solar Collector dimensions: 2m x 1m

Type : ST-DGL INOX IN-OUT Triple energy

Base dimensions : 1,55m x 0,75m

Made in Greece

The INOX SOLAR TECH ST-DGL solar water heater is of excellent quality. The quality of the storage tank is also important for both the longevity of the system and the minimization of heat losses.

Solar Water Heater Certificates: See certificates

BOILER TECHNICAL CHARACTERISTICS

• Thermos container made of special steel with enamelling.
• Heat exchanger made of special steel.
• Thermal container insulation (polyurethane 70mm, 40kg/m3).
• Εξωτερικό και εσωτερικό από ανοξείδωτο ατσάλι (INOX) 316L HiMo, ιδιαίτερα ανθεκτικό στις υπεριώδεις ακτίνες, σε υγρά κλίματα και σε παραθαλάσσιες περιοχές.
• Absorber tube with expansion cap.
• Electric resistance 4Kw (optional), anti-corrosive, with safety thermostat.
• Magnesium anode for corrosion protection.
• Hot water output.
• Closed circuit output.
• Cold water inlet (water supply network) with 10 atmosphere safety valve.
• Enameled coil for connection to central heating (only for triple energy boilers).
• Closed circuit safety valve.

COLLECTOR TECHNICAL CHARACTERISTICS

• Aluminum collector frame (powder coated).
• Aluzinc collector back 0.4mm thick.
• Selective absorbing surface high selective PVD coating with absorption coefficient α = 0.95 ± 0.02 and emission coefficient ε = 0.05 ± 0.02.
• Welding with laser technology to optimize performance. Copper hydroskeleton Ø 22mm (headers) and Ø 8mm (risers) for optimal flow of the thermal carrier.
• 30mm thick stone wool insulation and 20mm thick side reinforcements.
• Security safety glass, 4mm thick, for complete tightness, EPDM rubber is placed between the glass and the frame.

Το άρθρο Ηλιακός θερμοσίφωνας INOX ΜΕΣΑ-ΕΞΩ 120 λίτρα 2,0m2 τριπλής ενέργειας εμφανίστηκε πρώτα στο Solar Clima.